|
 |
 |
|
 |
| |
| |
제품 개요 :
- 4대의 카메라를 설치하여 일반 TV에서 볼 수 있고 VCR에 녹화도 가능합니다.
- USB2.0 을 통하여 PC에 저장하여 이후에 재생이 가능함
- 인터넷을 통하여 타 PC에서 카메라 화면을 시청 및 저장이 가능합니다.
USB 매직 가드 연결 구성도
PIP-window changeable: the video source
(VIDEO1~VIDEO4) can be changed
Supports Decoder Setup function : BRIGHTNESS,
CONTRAST、SATURATION、HUE can be adjusted for each
individual camera.
소프트웨어 :
- Plug & play USB 2.0 interface
- Requires a minimum of an Intel Pentium 4 1.0 GHz
processor. Non compatible with non-Intel processors.
- For use with Windows 2000/XP ONLY.
- Bundled with Digital MGuard DVR software. (Mpeg4
Video Database and Divx 5.0.2 Mpeg4 Codec).
- Software: Real Time MPEG4 avi video encoder and
decoder.
- Display and record each camera or any video signal
simultaneously.
- Supports NTSC or PAL video system.
- Adjustable video display settings:Brightness,
Contrast, Hue, Saturation, quality, alarm, motion
detection area.
- Preview window size adjustable ( zoom ).
- Allows the user to define the environment that
they do not wish to observe, by
adjusting mask area and sensitivity.
- Mpeg4 video file database management, delete,
backup or review.
- Storage recycle options
- Mpeg4 codec feature :
Automatically generates Divx mp4-avi file according
to your system time.
The real-time software encoder can directly record 4
Video sources to HD.
Every camera Compression: 5~6Gbytes/24hr ( All
frames are recorded ).
Every camera Compression: 0.5G~3Gbytes/24hr (with
motion and time interval ).
- Frame resolution: NTSC 320*240,PAL 360*288.
- Every camera recording frame rates: Pentium4
1GHz:6~8 fps、Pentium4 2GHz:8~12 fps.、Pentium4
2.8GHz:12~14 fps.
- Every camera preview frame rates: Pentium4
1GHz:15~20 fps.、Pentium4 2GHz:20~25 fps.、Pentium4
2.8GHz:25~30 fps.
- HD requirements: about 80GB for one week (May vary
depending upon frame rates and motion detection
settings.
- System RAM: 128 MB or above.
하드웨어 :
- Switchable NTSC/PAL video system.
- Supports 2 Composite VIDEO out to TV or recording
by VCR or Digital MGuard DVR software (by USB 2.0 ).
- Supports GPIO function:4 input and 1 output.
- Supports 4 independent composite video input
connectors.
- Video 1~4 buttons are used to display single
channel full screen video and set main-channel for
PIP mode.
- Real time display each video on 1/4 display area
at the same time.
- Provides horizontal image mirroring.
- Date, Time & Channel Name shows status of each
Quad display.
- Date and Time can be selected to be displayed ON
or OFF the screen.
|
|
|
|
|
 |
 |
|
|
|
|
|
|
|
|
)
