• Input on a shielded RJ-45 connector
• Automatic and manual level and peaking adjustments
• Dual stereo audio outputs (balanced/unbalanced)
• External power supply included (part number 70-057-01)
• Through-desk, under-desk, and projector bracket mountable
• Rugged metal enclosure

Video
Number/signal type	1 or 2 sets of proprietary analog signals
Connectors	1 or 2 shielded RJ-45 female
Video input ― refer to the TP Transmitters Family User's Manual, part #68‑546‑02
Video output
Number/signal type
TP R BNC A	1 analog RGBHV, RGBS, RGsB, component video, or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL composite video from a single source
TP R BNC AV	1 analog RGBHV, RGBS, RGsB, component video, or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL/SECAM composite video from a single source and 1 NTSC/PAL/SECAM composite video
TP R 15HD A	1 analog RGBHV, RGBS, RGsB, component video, or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL composite video from a single source
TP R AV	1 NTSC/PAL/SECAM composite video
Connectors
TP R BNC A	5 BNC female
TP R BNC AV	6 BNC female
TP R 15HD A	(1) 15-pin HD female
TP R AV	1 BNC female
Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB 0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels	0.3 V to 1.45 Vp-p
Impedance	75 ohms
Audio
Number/signal type	1 or 2 sets of analog proprietary signals
Connectors	1 or 2 shielded RJ-45 female
Frequency response	20 Hz to 20 kHz, >÷0.05 dB
THD + Noise	0.03% @ 1 kHz, 0.3% @ 20 kHz at maximum output (unweighted)
S/N	>63 dB at nominal level
Crosstalk	<-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>80 dB @ 1 kHz
CMRR	>33 dB @ 20 Hz to 20 kHz
Audio input ― refer to the TP Transmitters Family User's Manual, part #68‑546‑02
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≒ 2 dBu
Audio output
Number/signal type
TP R BNC A,
TP R AV	1 stereo audio balanced/unbalanced, and 1 stereo audio unbalanced
TP R 15HD A	1 stereo audio balanced/unbalanced
TP R BNC AV	2 stereo audio balanced/unbalanced, and 2 stereo audio unbalanced
Connectors
TP R 15HD A	(1) 3.5 mm, 5-pole captive screw connector per input
All other models	2 female RCA (left/right) per input (1) 3.5 mm, 5-pole captive screw connector per input
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	÷0.1 dB channel to channel
Maximum level (600 ohm)	>+11.5 dBm, balanced at 1%THD+N
General
Power (TP R BNC AV)	100 VAC to 240 VAC, 50/60 Hz, 40 watts, internal, autoswitchable
External power supply (all models except TP R BNC AV)	100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 15 VDC, 0.8 A, regulated
Power input requirements
TP R BNC A, TP R AV	15 VDC, 0.3 A (minimum)
TP R 15HD A	15 VDC, 0.34 A (maximum)
Temperature/humidity	Storage -40▲ to +158▲F (-40▲ to +70▲C) / 10% to 90%, noncondensing Operating +32▲ to +122▲F (0▲ to +50▲C) / 10% to 90%, noncondensing
Rack mount
TP R AV	No, but projector mountable with optional mounting kit (#70-077-04), furniture mountable with optional mounting brackets (#70-077-01 and #70-077-02).
TP R 15HD A	Yes, with optional VersaTools 1U rack shelf, part #60-190-20 or optional standard 1U rack shelf, part #60-190-01. Also, projector mountable with optional mounting kit, part #70-217-01 or under-furniture mountable with optional mounting brackets, part #70-212-01.
TP R BNC A, TP R BNC AV	Yes, with optional 1U rack shelf, part #60-190-01. Also, projector mountable with optional mounting kit, part #70-077-04 or furniture mountable with optional mounting brackets #70-077-01, 70-077-02.
Enclosure type	Metal
Enclosure dimensions
TP R BNC A	1.3" H x 8.75" W x 7.0" D (<1U high, half rack wide) 3.3 cm H x 22.2 cm W x 17.8 cm D (Depth excludes connectors.)
TP R BNC AV	1.7" H x 8.75" W x 7.0" D (1U high, half rack wide) 4.3 cm H x 22.2 cm W x 17.8 cm D (Depth excludes connectors.)
TP R 15HD A	1.6" H x 4.25" W x 3.0" D (1U high, quarter rack wide) 4.1 cm H x 10.8 cm W x 7.6 cm D (Depth excludes connectors.)
TP R AV	1.25" H x 4.75" W x 7.0" D 3.2 cm H x 12.1 cm W x 17.8 cm D (Depth excludes connectors.)
Product weight
TP R BNC A	1.6 lbs (0.7 kg)
TP R BNC AV	2.6 lbs (1.2 kg)
TP R 15HD A	0.4 lbs (0.2 kg)
TP R AV	0.9 lbs (0.4 kg)
Shipping weight
TP R BNC A	4 lbs (2 kg)
TP R BNC AV	5 lbs (3 kg)
TP R 15HD A	2 lbs (1 kg)
TP R AV	3 lbs (2 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Listings	UL, CUL
Compliances	CE, FCC Class A
MTBF	30,000 hours