LAN 케이블을 사용하여 HDMI 케이블을 연장 매립하는 시스템

사용하는 LAN케이블의 성능 및 HDMI 출력기기 와 디스플레이의 성능에 따라 지원되는 해상되는 좌우됩니다.

HDMI Over CAT5E / CAT6 Extender Wall Plate w/ LED Indicator (Pair) - Single Port (1P) - White

Extend the range of your High Speed HDMI signal and keep the wiring hidden safely within your walls using this HDMI Wall Plate Extender!

The HDMI Wall Plate Extenders use Cat5e or Cat6 network cables to transmit the HDMI audio-video signal over distances greater than the 25 foot maximum certified for High Speed signals using HDMI cables alone. To use them you need to run two Cat5e/6 cables through the walls. Note that these must be CL2 rated for in-wall use and must be wired to the EIA/TIA-568B standard.

Next you plug the ends of each cable into the backs of the wall plates. Make sure that the wall plate labeled "HDMI IN" is at the source side and the one labeled "HDMI OUT" is at the destination end. Once the cables are inserted into the wall plates, screw in the cable bridges to make sure they do not disconnect or come loose.

Tip: The Cat5e/6 cables need to be plugged into the appropriate jack on the back of the wallplate, labeled 1 and 2. To make it easier to identify which cable is which, it is recommended that you use different colored cables. So, for example, the Red cable would be Cable 1 and the Green cable would be Cable 2.

Now, install the Wall Plates into a single-gang, low voltage mounting bracket (not included) in the wall and install the faceplates. Your extender is now ready for use! Simply plug the output of your source device (e.g., AV Receiver, Blu-Ray player, etc.) into the HDMI IN jack and plug the TV in your remote room into the HDMI OUT jack.

Your HDMI Extender is now ready for use! Under most circumstances the system will draw all necessary power from the HDMI cable itself. If you have signal reliability issues, you may need to plug a 5 VDC AC adapter into one or both of the wall plates to provide necessary power. Alternatively, you can hardwire a 5 VDC AC adapter into the back of the remote wall plate (labeled HDMI OUT), with the positive wire connected to the + and the negative wire connected to the - connection.

Tip: Cat6 cables will reliably run at longer distances than Cat5e cables. Also, STP (shielded) cables will reliably run at longer distances than UTP (unshielded) ones.

Note: The 5 VDC power jacks on the front of each wall plate are "standard" cylindrical DC power jacks with a 2.1 mm pin diameter.

Features:

Extends HDMI 1080p signals reliably up to 30 meters (90 feet)
Automatic adjustment of feedback, equalization, and amplification
Powered by the HDMI cable in most installations
Optional 5 VDC power input for the rare cases when self-power is insufficient for a reliably signal
Conforms to North American wall plate standard
Can use Cat5e or Cat6, UTP or STP cabling
Supports HDMI resolutions up to 1080p with 12-bit color depth
Supports high resolution audio, including DTS-HD Master Audio and Dolby True-HD audio

상품 Q&A (총 1건)

상품에 대해 궁금한 점을 문의해주시면 신속하고 친절하게 답변해 드립니다.

번호	상태	제목	작성자	작성일
1	답변완료	[무엇이든 물어보세요] TrueA HDMI CAT5E CAT6 Extender Wall Plate LED Indicator (TrueAV)	오디오앤케이블	2026-09-22 09-22
[문의 내용] 본 상품에 대한 호환성, 규격, 대량구매 견적, 발송일정 등 궁금한 점이 있으시면 편하게 문의를 남겨주세요. 전문 담당자가 확인 후 신속하고 친절하게 답변 드리겠습니다. ↳ [답변] 오디오앤케이블 고객지원팀 2026-09-22 안녕하세요, 고객님! 오디오앤케이블입니다. 항상 정성을 다해 최고의 품질과 정확한 배송을 약속드립니다. 궁금하신 사항은 상단의 [고객문의하기] 버튼을 통해 남겨주시면 성심성의껏 안내해 드리겠습니다. 감사합니다.

배송방법	택배 (한진택배)
배송비	무료배송 (50,000원 이상 구매 시 무료) (제주/도서산간 추가 운임)
출고 마감	평일 14:00 결제 완료 건 당일 발송 (토, 일, 공휴일 제외)
교환/반품	상품 수령 후 7일 이내 신청 가능 (단순변심 시 왕복배송비 5,000원 고객 부담)
반품 불가	케이블 절단/가공 제작 상품, 포장 개봉 및 사용 흔적으로 재판매 불가 시
고객센터	[하단고객센터 참조] (평일 09:30~17:00)

TrueA HDMI CAT5E CAT6 Extender Wall Plate LED Indicator

상품 Q&A 문의 작성

🔔 문의 답변 등록 알림